Films for the industry are made of mono and multi-layer polyethylene film. They may be of different width, with or without printing, and various slipping. The typical thickness of the film industry is 0.008 to 0.200 mm. You have the option of micro and additional finishing. Films for the industry have a wide range of applications: coating paper, waterproofing, packing Styrofoam, hoods brick industry etc. Industrial foil thickness of 0.008 mm is used for the coating of paper, and in principle is 3 cm narrower paper. Industrial sheet width of 2 meters and a thickness of 0.200 mm is used as a sealing membrane, and called tzv.namjenske film for silage, swimming pools and so on. The film industry in width 1030 or 1040 mm, and a thickness of 0.020 mm, is used for packing styrofoam, while industrial foil made of LD (hard) material, width 1200 mm, and a thickness of 0.070 to 0.150 mm, are used as a hood for brick industry. There are also industrial bags with the press, which may be the valve opening, which is used for packing fertilizer, glue siporex, maleic acid and other products in the automatic feed.